Go to Aluvii -> Hardware Management -> CK Installer
- Open up CK Installer from the Hardware Management tab and click next.
- Choose the proper OS Version and Choose Beta
- Verify options and check system information then select “Start” and wait for it to finish the download.
- Go into the Aluvii platform -> Administration -> Configuration and then copy the gateway key for CardKnox. Also select the check box named “Auto Exit on Approved”
- Check Enable Device, Choose Model, Enable EMV
- Go into Control Panel -> Devices and Settings -> Double check the COM Port
- Finish up installation from here by following the prompts
Go to Aluvii -> Hardware Management -> Install CK 32 or CK 64 Bit
- Follow the prompts and double check the port number
- Either test in Employee Registers or use the test CardKnox site